TFT35-E3 Mount for Cr-10S Pro

Remix of a remix of my TFT35 v3.0 mount for Cr-10S Pro/Cr-10 Max. The mount plate is inserted inside the base of the printer and is attached with the notch toward the top of the printer using the original mounting hardware for the Creality touchscreen. The mount is attached to the mount plate using 4 M3x5 (or up to M3x8) screws. The TFT35-E3 is attached inside the case with 4 M3x5mm screws. Cables are attached to EXP1, EXP2, and RS232 (for the touchscreen) and the case is inserted into the mount and attached with 4 M3x5mm screws.

UPDATE: I have been informed that the profile of this mount is too tall for the Cr-10 Max.

Print Settings

Printer Brand:

Creality

Printer:

CR10S PRO

Rafts:

No

Supports:

Yes

Resolution:

.2

Infill:

20

Filament: Sunlu PETG Red

Notes:

Support is needed for the mount from the buildplate, and is optional for the case and mount for the USB and SD card openings.