This is an E3D V6 model that I attempted to replicate as much as possible, through use of the blueprints provided by E3D. I wanted to have models that I could scale up, and I wanted to see what I could do with Fusion 360. It still needs fine tuning, but I am pretty happy with the results so far.
I printed these at 200% size, which seemed to come out quite well. Though, I am still trying to fix the drooping on some of the inside parts. I will keep working on this project as time allows. Constructive criticism is welcome.
Please visit my website if you have the time. I am trying to get myself into the habit of producing blogs, YouTube videos, and projects. My website is going to be the hub, connecting all of my content.
www.benstechstop.com
Printer:
Folgertech FT-5
Rafts:
No
Supports:
No
Resolution:
0.1-0.2 mm
Infill:
20-30%
Notes:
I used both the Creality CR-10S, and Folgertech FT-5 to print these parts. I printed the nozzle and heat break at a 0.1 mm layer height. I printed the heat block and heat sink at a 0.2 mm layer height.
These must be printed at 200% size, at least, in order to have things slice nicely. Otherwise, some parts are too thin to come through the slicing process.I moved the parts half way through the print bed surface on the slicer for just this test. I may specifically make halved models in the future, for simplicity's sake. Please let me know of any problems you run into, I will try to help as much as possible! :-)
Category: PropsThe author marked this model as their own original creation. Imported from Thingiverse.