This is a Lithophane lamp/ holder with partly a penholder in the back. I designed this as a gift for my father.
The lithophane I created at https://lithophanemaker.com/Framed%20Lithophane.html.
Please use the following settings/ dimensions for your litho:
Frame options: No border.
Height: 100 mm
Width: 66,67 mm
The rest should be fine.
Update: I added a 70.3 mm adapter that you can glue to the bottom, in case of such a size LED. Please feel free of course to design your own.
For the LED light I used a 79 mm LED light that I put in the bottom. It just goes in a couple of mm, so that there is no shade in the bottom.
Special thanks to the Lithophanemaker for sharing the possibilty to easily create such a lithophane. Please check out his channel: https://www.youtube.com/channel/UCU13fzqAu4BTAhOSHJgHRqg
Printer Brand:
Creality
Printer:
CR-X
Rafts:
No
Supports:
Yes
Infill:
20
Filament:
Eryone PLALight Wood
Notes:
For the lithophane I used Esun White PLA+.
Post-Printing =============The lamp is prepared to mount a 79 mm diameter LED light.
Category: DecorThe author marked this model as their own original creation. Imported from Thingiverse.