Creality Ender 3 V2 - Clean Shroud 2.0 (40x20mm Hot-End Fan, 4010 Blower Fan)

This replaces the original Shroud

For 40x20mm Hot-End Fan and the stock 4010 Blower Fan!

I made a new version of my "Clean Shroud" that holds a 40x20mm Hot-End Fan and the stock 4010 Blower Fan (with its mounting) for Creality Ender-3 V2.

You can still use the original screws, but you will have to heat one screw up with a lighter and gently screw in it in the hole, this will thred the hole. Then gently screw it out and let everything cool off.

• Print the Fan Grill with the Creality-logo faceing up!
• Print the Shroud so you have the open side up, and the front side down. Use supports (10% Zig-Zag)!
• Fasten the Cover to the Shroud with double sided tape, after you mounted the 40x20mm fan.

Happy Printing!

Print Settings

Printer:

Creality Ender 3 V2

Rafts: 

Doesn't Matter

Supports:

Yes

Resolution: 

0.12

Infill:

100

Filament:

Any PETG, ABS, PLA

Any

Category: 3D Printer Parts