My own design of capsule from DragonBall, DBZ, DBS etc
Its actually a small storage, remove the cap and insert what you want in :)
Print without supports, only skirt to prevent fall during printing.
I used 0.2mm nozzle with 0.15 layers for nicer finish but bigger nozzle should not be a problem.
I included the stickers to print with 2D printer, colors and numbers are matching with screenshot of bulma case.
EDIT, I added hi-resolution file (v2)
EDIT 2, Added small one hi-res
You can donate/support here :
https://www.paypal.me/ludiks , thank you so much if you can do it.
Printer:
ANET A8
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
15%
Notes:
I didnt design this for tips, but if one comes, I would be proud to have designed something that worth it :)
Category: Mechanical ToysThe author marked this model as their own original creation. Imported from Thingiverse.