This is a skid plate designed for the Axial SCX10. It has a flat bottom and counter sunk screws for high clearance and a pocket cut out for lighter weight and less filament/time when printed. Screw holes and counter-bores are according to M3x0.5mm metric standards.
Note: The 2 versions are different in the link mount / chassis rail screw holes. The "stock" version is designed for the stock chassis rails as it can only be tapped on the inner hole beyond the lower link cutouts and mounted with M3x35mm screws. The "full thread" version can be tapped from the outside all the way through allowing for the use of aftermarket chassis rails cut from other materials such as aluminium or carbon.
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Category: R/C VehiclesThe author marked this model as their own original creation. Imported from Thingiverse.