Miata Gauge Panel V3 + V4

right now i am in the process of turboing my 1996 Mazda miata and i couldn't seem to find a good way to mount the…
10
66
0
743
updated April 27, 2022

Description

PDF

right now i am in the process of turboing my 1996 Mazda miata and i couldn't seem to find a good way to mount the boost gauge and AFR gauge so i removed the little cubby under the radio and made this to fit in there! hope someone else can get some use of this i know i will!

I used Brass #8 x 3/4 in. Wood Screws to hold mine in and it worked great!

Print Settings

Printer Brand:

RepRap

Printer:

Duplicator i3 V2

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

20%

Custom Section

update Log:

V2:
the holes are cut out for 2" gauges however when i designed it i made the holes exactly 2" so it was extremely snug i re-uploaded the files and made the holes slightly bigger! if you are going to print this make sure you download the most recent STL File!

V3:

-made the hole for the screw head larger

-made holes a little bigger to work with all gauges(some are larger than 2")

-Added cut outs on the back for the bracket that holds the gauge in place.

V4: added holes for 20mm toggle buttons (see pictures)

Category: Automotive

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License