Squash ball feet for Prusa MK3 MK3S
Twist mount squash ball feet for Prusa printer MK3 or MK3S or any printer with 30x30 aluminium profiles.
22
322
3
2851
updated
January 18, 2020
Makes
Comments
Did the frame change between 4 years ago and when these were designed? They would not twist into place on my Original MK3. The post on top broke off.
@Vance_12001 I used the same design with previous MK3 printer and with current MK3S. I printed mine with petg. HAve you checked is there any residue or overhangs in the twist-lock gaps? Cut them of if there is.
@DiAleksi_44436 The supports came off cleanly. It just seems the gap is not deep enough.
View 2 more comments
Nice design, really works great to reduce the sound.
I had no issues with a weak twist-lock. I have printed it with a layer hight of 0.3.
twist-lock at the top is weakest point and will break during installation on the printer, as happened to me.
can confirm :/
View one more comment