P5 Muto II Wide-Angle Pinhole camera

This is a remix of Schlem's excellent Muto pinhole camera. While I loved the idea of the original, I was not too keen…
1
12
0
192
updated April 27, 2022

Description

PDF

This is a remix of Schlem's excellent Muto pinhole camera.

While I loved the idea of the original, I was not too keen on how heavily it relies on tape for light-proofing. So I designed a new front for it. The hex plate now has a pretty solid light trap so that if tape is used, it's just for holding it if it ever comes loose.

I also re-designed the shutter so that it's easier to operate.

The pinhole is now held by a small retaining disk so that it's more secure than ever.

I also changed the tripod mounts by a set of Manfrotto PL200 compatible quick release tripod plates. If you want to use a 1/4-20 screw instead, you can use the P5 Muto original parts.

I printed the front plate with 20% infill.

The hex plate was printed at 20% infill with a brim as the exterior baffle is not very wide.

The shutter was printed at 20% infill.

The retaining disk is printed at 20% infill with a brim as it tends to get loose on the glass plate.

The parts fit together very tightly so a good de-burring and light sanding is required.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Resolution:

Standard 0.2

Infill:

20%

Filament: AMZ3D PLA Black

Category: Camera

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License