Candle mold 40x100 with a string lock

This is a candle mold container for 40mm diameter and max 100mm tall candle.

1. Lock the mold container with a ziplock
2. Put the candle string through the bottom lid and tape it to lid's hollow
3. Attach the bottom lid to the bottom of the mold container
4. Put a string through the top lid's hole from the bottom
5. Put the top lid on the top of the container
6. Tighten the string and lock it on the side of the top lid
7. Pour melted wax into the container and let it cool. Do not throw away the rest of the wax yet
8. While cooling the wax will shrink and there will be big pit. Melt the rest of the wax and pour it
9. Wait for a few hours for wax to harden
10. Remove both lids and the zip lock
11. Open the container by twisting and take the candle out
    Print all parts with 98A TPU.
    If possible, print bottom lid with 95A TPU or softer.

2018-12-05 Updated the top lid. Bottom supports not touching the wax if full filled.