This is a 3D Printer Head Made For The Diamond Hotend.
Credit to BoothyBoothy for allowing me to use a couple parts from his Manta MK2 For Ender 3 V1/V2 Design : https://www.thingiverse.com/thing:4943125
I really suggest checking out his other designs!
Things you need:
20 x 5mm OD by 5mm L M3 Heat inserts
4 x 50mm M3 screws
2 x 20mm M3 screws
5 x 8mm M3 screws
4 x 6mm M3 screws
2 x 12mm M3 screw
1 x 10mm M3 screw
A Diamond Hotend and all of it's respective parts (follow reprap's instructions here: https://reprap.org/wiki/Diamond_Hotend#Cooling_Shield_-_Standard_Prusa_i3_version)
1 x 50mm by 50mm by 10mm fan
(Optional) 2 x 5015 blower fans
(Optional) 1 x BL Touch
Several feet/meters of Bowden tube
(If using Nema stepper motors) 3 x Stepper Motor Mounts
3 x Extruders of your choice
follow BoothyBoothy's part prep for the rear mounting plate and duct base
remove support and insert the 5mm heat inserts into all the holes into the main mounting block, into the top hole on the ducts, and the bottom holes on the Bl Touch Mount.
Assembly video here:
https://www.mediafire.com/file/98v0qacykt8w7id/updated.avi/file
The author marked this model as their own original creation. Imported from Thingiverse.