This is a modification of the https://www.thingiverse.com/thing:4678852
I removed the bearing post and changed it to a M8 hole. Use M8-1.25 x 1.25 or longer screw/bolt 4 to 6 washers to center the Type 608ZZ ball bearing.
I also added filets to all the corners to decrease stress points on the part
You need one bracket and one bearing runner printed.
Additional you will need the following:
1x M8-1.25 x 1.25in or longer screw/bolt
1x M8-1.25 Hex Nut
4 to 8 M8 washers
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
50
Filament: Inland PLA or PETG Any
Category: 3D Printer PartsThe author marked this model as their own original creation. Imported from Thingiverse.