LM2596 Buck Converter Case

Another LM2596 Case. None of the other LM2596 Cases I found quite fitted the Buck that I have, so I created my own.
I made the button pin longer than necessary to allow for "stick out" choice.
Hope it's useful.
I used 4 x M3x15 screws.

Created in FreeCAD.

Ender 3 v2, Generic PLA, 0.4mm nozzle, 0.2mm Layer height.

You'll need to do a little post production clean up of the holes (drill them all out and tap threads in the 4 holes in the base for the cover screws)