Voxelab Aquila Adjustable Vertical LCD Mount

This remix is inspired by https://www.thingiverse.com/thing:4901758 by Junr05, but technically is a remix of the…
22
136
7
656
updated April 27, 2022

Description

PDF

This remix is inspired by https://www.thingiverse.com/thing:4901758 by Junr05, but technically is a remix of the original fixed vertical mount listed. I had issues with the model by Junr05 - issues with the model downloaded showed in the final print, so I decided to start from the original.

Test prints done in PETG, with supports at a .28 layer height on an AM8 with E3DV6 bowden setup. (just bought the Voxelab Aquila as an upgrade). Filament choice is up to the user, however I prefer to print printer parts in PETG when I can. PLA or PLA+ should work just fine.

Adjustment is smooth and only requires loosening of the top M4x12 bolt. Does require the lower bolt to be close to or at max left justification on the rail, or the back of the mount will hit the rail. However, should suffice for most viewing angles.

Designed in Fusion360 (.f3d provided). Saved in .3mf and .stl formats

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

No

Supports:

Yes

Resolution:

.28

Infill:

20%

Filament: dealers-choice dealers-choice

Category: 3D Printer Parts

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License