material reduced bottom for stackable beer crate

every meter filament counts, here is a filament reduced version of the bottom part for the stackable beer crates. This is a drop in replacement, dimensions are kept with the original.

I added pictures from the slice info. First picture is for the original and second this version. As you can see amount of used filament is reduced by over 40% and it prints a bit faster …. 

Print Instructions

• 0% infill
• 2 Perimeters
• 0.2 layer height
• 0.6 line width
• PLA works good
• let the freshly printed model cool down, otherwise you get the chance of bending it

see my other beer crate mods too: https://www.printables.com/social/113164-antimaterie/collections/403088

Additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.