Redesigned the very good looking bottle opener in OpenSCAD and split it up so it is possible to print it in multi-color with only one nozzle
And made it compatible with a 2 euro cent coin.
For the best strength print with 100% infill
and in the multi-color case with a layer height of 0.2mm
If you have a Marlin like me, you can use the M600 command to change the filament mid printing.
Activate the feature in the firmware and add M600 before and after the teeth and before the saliva. If you want to print it in three different colors.
https://marlinfw.org/docs/gcode/M600.html
Drunk Domo Beer Bottle Opener by tachyio
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament: Flux PLA Red - White - Orange
Category: Hand Tools
The author marked this model as their own original creation. Imported from Thingiverse.