Cradle up your laptop vertical and get your desktop neat.
Designed for laptops and IPad/Tablets, put two devices on the stand at the same time.
the exported modular stand consists out of the base and two side walls. The prepared files are adjustable between 10mm and 35mm.
To assemble the stand you need 6 M3 screw with a maximum length of 18mm.
And optional thread insert also 6 M3 with a length of up to 10mm.
For the base you choose between button or socket head screws or countersunk screws.
For the side walls choose either with or without inserted threads.
I used thread inserts and button screws.
Base and two side walls in one file. The side walls are at a distance of:
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
Adaptive - between 0.12 and 0.16
Infill:
20
Filament: Eryone PETG black
Notes:
I printed the side walls 90 degree turned on the big flat side. To increase the strength of the wall. Not sure if it is necessary.
Category: Office
The author marked this model as their own original creation. Imported from Thingiverse.