Sharp Tabletop Dice Masters

This is a complete set of sharp tabletop dice masters. It includes the following dice:

• D4
• D6
• D8
• D10
• D10 percentile
• D12
• D20

How to use:

1. Print the dice in resin. I suggest to support the dice on all edges facing the buildplate and additionally some overhangs in the numbers.
2. Carefully wetsand the resin dice with general 1000 grit sandpaper.
3. Polish the dice. I use 3M Zona paper.
4. Make a silicone mould. I made a cap mould.
5. Cast new dice with two component epoxy. 
6. Optional but recommended: Use a pressure pot to eliminate bubbles in your dice.

There are many resources on youtube on how to make dice from printed resin masters. These go into a lot more details and I recommend using them.