Slingshot Cyclops v1.1

You attach the bands by pushing a looped end into the slot from the side and locking it with a piece of filament through the center of the loop.

Print in 0.15mm with 5 perimeters and 13 top/bottom layers.

I used different infill percentages for the different parts of the slingshot but it's up to you.

You need those 5 perimeters if you want to sand it after printing which I HIGHLY recommend!

If you like you can print two eyes in TPU and push them into the hole from both sides.

The opening in the eye is designed to hold a 8mm steel ball.

Here's a tutorial for attaching rolled up bands: 

Revisions:

1.1

• Bigger band hole for normal 1.75mm filament lock.
• Optimized geometry for finger grooves.