Prusa 2 front side panel clip for XXL Smart LCD Controller

https://www.instagram.com/p/BPV7myojRiC

I wanted to mount a raprapdiscount.com XXL Smart LCD Controller on my classic Prusa 2. This clip is available in DXF (for laser cutting) and STL (for 3D printing).

print v2a for the 63mm side of the board, and v2b for the 80mm side. should be a snug fit. I used 3mm thick material. YMMV.

outside dimensions should be ~98.9 mm* 75.9 mm.

Support me through Patreon: https://www.patreon.com/imakerobots

Or make a one time donation: https://www.paypal.me/imakerobots

Every like, share, and subscribe helps!

Blog: http://marginallyclever.com/

Instagram: https://www.instagram.com/imakerobots

Facebook: https://www.facebook.com/MarginallyClever

Twitter: https://twitter.com/aggrav8d

Discord: https://discord.gg/Q5TZFmB

Post-Printing

I cut off the middle leg for the 80mm side of the board, and the bottom leg for the 63mm side of the board. Since I did this on my laser cutter it was easy to add one extra line.

How I Designed This

Fusion 360

I used the STL of the metric frame-vertex.stl part from the Prusa 2 github page to measure the distance between each bar on the front of the Prusa 2. I laser cut one design, tested it, tweaked for clearances that I didn't anticipate, and on the second try everything was great. This is what you have here.