Benchy Receiver Hitch Cover 2 inch

Combined a standard Benchy (resized to fit the hitch cover) and a standard hitch cover design. Grind/file the outside corners of the square tube to fit inside your 2" receiver, take a very little at a time to finish with a hand-snug fit.

Printing:

Print the parts separately. Hitch should be face down on the bed, Benchy is traditionally printed standing up as if it was floating on water.

Glue together, or tap the Benchy with holes to M6 or use self-tapping screws.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

200

Infill:

38

Filament: PolyMaker PETG