Articulated Shark

No supports required. Just slice and print!!

4 Versions available:

• Shark_v4_A.stl: Original design, movable jaw
• Shark_v4_B.stl: Friendly face, movable jaw
• Shark_v4_C.stl: Original design, NON-movable jaw
• Shark_v4_D.stl: Friendly face, NON-movable jaw

Design updated to v4 for a tighter tail joint

The non-movable versions are intended for children, as teeth are quite sharp. Or just in case you have trouble printing the movable one.

Best results if you use a thin layer resolution (0.16 mm works perfect)

After printing, the tail and the jaw should get free with a little force: https://youtu.be/14z1ll9yMmU

Then just enjoy it, even in the water!! https://youtu.be/E1W-RyH8bGA

Check my other articulated designs HERE!

Print Settings

Printer Brand:

Creality

Printer: 

Ender 5

Rafts:

No

Supports: 

No

Resolution:

0.16 mm

Infill: 

0%

Category: Toys & Games