Cat Cone Clip (AKA POOD Clip)

This is a rounded cone clip for the Remedy + Recovery E-Collar. We've had issues with some cats that wear the cone permanently gouging themselves on the sharp edges of the included clips, so this is a modified "safety" clip.

Printed on a Formlabs Form 2 out of Durable material. Try to keep the top of the clip pointed upwards with minimal supports on the top face. Leave a comment if there are any questions!

https://www.printables.com/social/240399-philrysk/prints

Print Settings

Printer Brand:

Formlabs

Printer:

Formlabs Form 2

Rafts:

Yes

Supports:

Yes

Resolution:

100 micron

Infill:

Solid

Filament: Formlabs Durable Clear

Notes:

Try to position the clip with the clip part down and the cover up, so that the surfaces that come in contact with the animal are smooth (which is the whole point of the clip)

The part was printed on a Formlabs Form 2 out of Durable material, therefore cleaning and curing was done to the part. The curing part helps a lot with rigidity.