Panasonic K-mechanism VCR motor pulley VDP1434

Drive piece for Panasonic K-mechanism VCR. This is the little drive component that couples a motor to a worm gear in the mechanism, Motor Pulley VDP-1434 or Loading Motor Coupling. The coupler tends to crack and stop transferring power, this print replaces the cracked piece. For model numbers AG-1980P and AG-5710P and others that use the K-mechanism.

As said in the print settings section, the component is printed in the Formlabs Durable resin, highest resolution and smallest support touch point. Make sure that your part is oriented such that the open top has no/minimal supports touching it.

I've only ever printed one, the first one I printed worked perfectly. Let me know if it doesn't work for you, and what changes were needed

Print Settings

Printer Brand:

Formlabs

Printer:

Formlabs Form 2

Rafts:

Yes

Supports:

Yes

Notes:

I printed this part on a Formlabs Form 2 printer, Durable material. Highest resolution possible. Orient the part so that the drive end has minimal supports, and use the smallest touchpoint size possible before the printer complains.

Cleaned and post cured to the Formlabs specifications.