Wireless Charging Pad Phone Stand

Samsung has a wireless charging pad that works well, but it orients the phone horizontally, which is a less than ideal viewing angle.  This model integrates the “Samsung Fast Charge Wireless Pad” into a phone stand.  It's a two part print in order to incorporate all the desired elements (i.e. overhangs).  A base piece and charger pad housing that sits in the base via a fin.  The charger cable exits the top (a 90 degree USB C would be perfect for cable management).  The charger pad was a snug fit with 0.3 mm layer height, holding most positions, including additional extrusion if needed for better contact with phone.  The corner curve is not perfectly in line with charger pad, but close enough that only a close inspection reveals the gap.

Note, made a few refinements in final model not shown in provided pictures of original model: lower profile on base + few others not visible in photos.

Best Buy Link to Charge Pad used in CAD modelling, photos: https://www.bestbuy.com/site/samsung-fast-charge-wireless-pad-black/6447834.p?skuId=6447834&ref=212&loc=1&gclid=Cj0KCQjw6pOTBhCTARIsAHF23fIOHpiiV80FuUFh29a3WumCQ0bVzi83lHr3EU46yeuFZYQDe0NoPysaApYfEALw_wcB&gclsrc=aw.ds

Modelled in Fusion 360