A little purse logo asl a test for printing with the 0,25 mm nozzle.
Thera are 3 different parts can be combined.
The prusa_fil is the filament
The prusa_spool-cut is the spool with a cut-out for the filament
The prusa_spool-full without the cutout.
There are project files as well for printing spool and filament as separated objects and one combined as a multicolor print.
The multicolor took me some time, because prusa doesn't deliver a setting for the MMU2S with 0,25 mm.
I did all prints with PETG and all worked well after leveling the heatbed very carefully. Be aware that my nozzle temperature settings are 20 - 30 degrees higher then the prusa standard, because I had real trouble with no filament came out of the tiny nozzle with the standards.
The author marked this model as their own original creation.