Blade Runner 2049 - Officer K's Blaster

Updated on 11/12/2018

WIP stands made by danielgeez that look realy nice to display this model. (Thanks Daniel!) https://www.thingiverse.com/thing:3272738

Updated on 13/11/2018 - Faulty Part FIXED

"Spring System" part now fixed. Guide rail groove goes all the way through. If you've downloaded these files before this update, please download the fixed SpringSystemFIXED.stl file.

Thanks for the people who flagged it, and sorry for the delay. Enjoy!

Updated on 12/11/2018 - Faulty Part

It seems since last update the "Spring System" part has problem. The groove for the guard rail wasn't going through the whole piece. I'll update it asap.

Reminder for everyone who have downloaded this model in the past, to download the "Spring System" part in the next update.

Updated on 26/03/2018

There was a gap inside Body.stl piece, that was a mistake. I think the print would still be okay, but just in case if you have downloaded the gun prior to this update feel free to re-download it and use the fixed piece! Thanks to Zimlorog for the catch!

After the trailer came out and when the images were leaked, I knew I had to try and build one of these in 3D and print it.

It took me a long time using references I found here and there, until the video from Tested was uploaded where I could see it way more clearer and from different angles, after that was a bit easier. It still took me a long time to finish the model and prepare it for printing but in the end it was worth it.

I tried to make it as accurate as I could.

Hope you enjoy it!

Tips: Bitcoin: 3AjndvCCWVES9KvodSUZQzPj4PsMmUEcNR

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK2S

Rafts:

No

Supports:

Yes

Resolution:

0.2mm

Infill:

10%

Notes:

Parts that I turned supports on:rnBarrelrn BodyrnGuardrn ProtectorrnTrigger Guard Rightrn Trigger Guard LeftrnrnPrint OptionsrnI printed all my pieces on a single plate of my Prusa i3 MK2S.rn Feel free to print them how ever you want.

Post-Printing

Assembly

The parts should all fit together and you will need some sort of glue to permanently secure them. rnrnI assembled mine in this order:rn Sight Row to Barrelrn Sight to Barrelrn Barrel to SpringSystemrn Charges to SpringSystemrn SpringSystem to Body (Make sure the rail is aligned properly)rn Handle to Bodyrn Protector Pin to Bodyrn Protector to Body (Make sure the rail is aligned properly)rn GuideRail to Barrel, Protector, Bodyrn Trigger to Bodyrn Trigger Guards to Handle and Guide Railrn Cocking to Bodyrn* Guard to Body