Ryobi 40V Leafblower Wall Mount

A wall mount for the Ryobi 40V leafblower that contains a clip/slot mount (as seen in the pictures). This can vary between leafblower models. 

This was remixed from the referenced model to make it sturdily wall mountable.

This is a two-piece model and you will need an M3 x12mm socket head screw and an M3 nut to join the pieces. 

Recommend printing at least the clip piece at 100% infill as it bears significant weight. I printed in PETG as it will be under load in the garage through a wide range of temperatures. May be fine with PLA but I did not want to risk my blower to test it.