A great low-cost DIY vertical blind system everybody can print and make.
I used tracing paper as main material for the blinds as it is 15 times cheaper than the dedicated fabric. (still holds up after 4 years) (standard 33cm rol cut in half)
The whole system can be accommodated for other widths, scale the “band” parts in the slicer (in one direction), OR change the model: here the cad files:
carriage | https://a360.co/3aDaocv |
end carriage | https://a360.co/3aFhNZ3 |
pulley A | https://a360.co/3EH0JyX |
pulley B | https://a360.co/3rQ3FUP |
OR place a comment or send me a message I will be happy to customize it to your needs.
A lightweight wooden stick 6x6mm to connect the carriages and a bamboo stick with the end_hook-B hot-glued in it at the end to turn the end carriage gears.
And finally: not stretchy nylon cord following this path:
The author hasn't provided the model origin yet.