IEM Case - Sleeve Design

A protective case for your in-ear monitors. This kit prints in 4 parts with a sleeve and storage base design.

The front window holds the IEM shells and 3.5mm jack . The narrower waist section between the foot and the window is where the cable winds.

The sleeve is designed with a tab-and-notch stop to keep it closed and hold the sleeve to the body.

3D printing settings

Print using PLA or PETG, pieces snap together but will require some glueing for them to stay together. The neck and head pieces should be printed laying down so that the sleeve can slide over them without the zipping noise. This will require some small amount of supports.