HAPE Quadrilla Changing Tower Red

I saw this tower here and print it. Tried to print it with and without supports, but it does not work for me. So I decieded to print parts and put them together with screws.

Print "HAPE Quadrilla Turm Rot Wechsler1.stl" twice with a resolution of 0.1 because of the little holes for the screws.

Attention: Do not overthighten the two screws of the slide.

I founded a group for the HAPE Quadrilla marble run: https://www.thingiverse.com/groups/hape-quadrilla-marble-run

Have a lot of fun with it.

Print Settings

Printer Brand:

Anycubic

Printer:

Predator

Rafts:

No

Supports:

No

Resolution:

0.1 and 0.2

Infill:

20 or 25%

Filament: Filamentwerk PLA red Post-Printing =============

You will need 8 screws 3,5 x 16 mm, 2 screws 3,5 x 20 mm for the slide