Creative Soundblaster Pro 2 CT1600 - Retro ISA PC Soundcard - Replacement Card Bracket

This is a replacement for the card bracket of Creative's SoundBlaster Pro 2 (CT1600)

---------------------------------
NEW for 2023 - an updated design that improves the tolerances. Now the design is measured directly from an original bracket and it should fit many more cards now :)

The speaker / line-in / mic icons are a very thin area so some colour from the back shows through. In the latest pictures, the rear side of the print has black marker on it and silver paint-pen marker on the front. That makes the icons nicely readable.
---------------------------------

It fits several other Creative soundblaster cards from that time, which should include:

Soundblaster 16 series:

CT1740

CT1750

CT1770

Soundblaster 2.0: CT1350B

It's meant to be printed upright as shown in the picture with supports (build plate only) to hold up the edges.

I used 0.15mm resolution with the regular 0.4mm nozzle. The filament used in the picture is Prusament silver PLA.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

Yes

Resolution:

0.15

Filament:

Prusament PLA

Prusament Silver

Notes:

Print with supports on build plate only to support the two edges that aren't supported otherwise

Category: Computer