Adjustable Spool Holder

This is a fully adjustable spool holder designed to be screwed down onto your enclosure. It can take spools from 40mm to 180mm width (almost any spool you can find on the market!). A gear system links the left and right side together, if you move one side the other moves as well. I recommend you use some kind of filament guide like this one: https://www.prusaprinters.org/prints/58073 for the popular IKEA Lack enclosure. 

Printed parts:

• 1x Bottom Plate.stl
• 1x Top Plate.stl
• 2x Side Plate.stl
• 4x Rack.stl
• 4x Roller.stl
• 2x Gear thick.stl
• 1x Gear thin.stl

Hardware:

• 9x 608 bearing (608ZZ or open; Sealed bearings might not work)
• 4x M5x16 socket head screws + nuts
• 2x 4mm countersunk wood screw

For Remixers:
The STEP file: https://github.com/testudor/adjustable-spool-holder

Changelog:

• 22.01.2020: Made recess holes for M5x16 a little wider and less deep

Print instructions:

Use 40% infill for racks, print everything else in 15%. Depending on your print's dimensional tolerances you might have to glue the racks into the side plate or have to sand some pieces until they fit.
If you own a Prusa MK3/MK3S you should not need any sanding/glue at all.