Kellashee Logo For i3 Mini

I'm a furry, and I made a logo of my character, and I really like it, so I quickly converted it into a quick, stylish test print I use to check different print settings and filament colors.

It's optimized for the Wanhao i3 Mini, using most of the print bed.

Any other printer will still work, though... At the end of the day it's just another 3D model.

Even though it's mostly 2D, this is still a fairly complex shape, so any major issues such as belt/motor slipping, layer shifts, stringing, adhesion failures, or problems with extrusion should present themselves.

Print Settings

Printer Brand:

Wanhao

Printer:

i3 Mini

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.2mm

Infill:

20%

Filament: CC3D PLA Silk Black, Silk Red, & Silk Rose Gold

Notes:

The model may load with a weird, glitchy, square "Base" at the bottom of the logo, but this will not actually print. It is a by-product of Cura's built-in image-to-print tool.

Here are the CURA settings I'm using. Ideally, these should help you dial in your i3 Mini if you're having trouble.

I also recommend using Elmer's Disappearing Purple Glue Stick for bed adhesion.

Cura Settings: http://kellashee.fun/~cheetawolf/kellashare/pythonw_2019-12-31_20-46-31.png http://kellashee.fun/~cheetawolf/kellashare/pythonw_2019-12-31_20-47-05.png http://kellashee.fun/~cheetawolf/kellashare/pythonw_2019-12-31_20-47-57.png

Category: 3D Printing Tests