L . E . G . S

L.E.G.S was designed to easily build small tables 
(+-600mm; 24") tall

The strength comes from the shell geometrical shape

Uses only 60 g of filament per tray/leg and prints with no support 

Minimal assembly  and 
No extra hardware required. 
 

After securing the plug into the table surface simply screw on the leg into position

The plug arrow indicates the leg direction and can be easily adjusted afterwards  if needed 

Each connection is Unique, you can follow the printed arrow for a perfect match. You can glue the part to make L.E.G.S inseparable

the intergraded feet carrier the load down to the floor