Duet 3 Tool Distribution Board Top Cover and 2020 Extrusion Mount

Print with any filament, 0.4mm nozzle, 10%+ infill. In PrusaSlicer, change the print orientation.

• Use 2x10mm countersink M3 screw and 2 M3 T-nuts to mount the support on 2020 extrusion
• Use 1x8mm M3 screw on the top left corner to mount the board to the support 
• Use 3x25mm M3 screws for the top cover
• Use 4xM3 Heat-set insert https://www.filastruder.com/collections/jubilee/products/ultrasert-ii-metric-inserts-pack-of-30 
  Hole size recommendations (M3 Short)
  C - Diameter ±0.03: 5.05 mm
  D - Diameter ±0.03: 5.31 mm
  Minimum Boss Diameter: 11.13 mm

Feel free to remix. Step files are attached licensed under GPL 3.0.