MagDock Mini Magazine Pouch (V1)

Everybody loves to dock :)

This is an easy to print magnetically retained magazine holster system built around a Tek Lok style connector and my KlockLok 360 canting system. This is sized for Glock 9mm full sized (17, 15, 10) magazines and 1911 mags. Everything is built around M4 screws.

--Parts list--

1 x M4 countersunk screw pack - (Amazon LINK)
1 x M4 heat set threaded insert pack - (Amazon LINK) 
1 x 26ish mm 60lb countersunk magnets - (Amazon LINK)
1 x tube of Superglue - Wherever you get superglue from if you are using TPU for the body. I am new to threaded inserts in TPU so there may be better solutions to this I am not aware of. 

You will need washers / nuts for the magnets but those usually come with the screw packs. The ones I linked above have them in the same box. 

These do not require KlockLok 360 connectors as you can mount it directly to a teklok if you want them to remain vertical. That is dumb though just make them cant.