Paint shaker

Produced with the awesome support from my Patrons!

There are other paint shakers here, but of course I had to do my own. It can contain several different models of citadel paints. I have some that are 20 years old, but still good.

You will also need:

• thick rubber band
• jig saw
• 4 small bolts (holes are a bit over 3mm)
• 4 nuts
• 8 washers

Clamp the paint shaker to the jig saw blade using the bolts. Tighten them quite hard. Put the paint in the cup, secure it with the rubber band. Start the jig saw. Go slowly at first. After a while, when you are confident that the paint pot is secure, go faster.Use protection for your ears.

Update for dropper bottles

I added models for this. It's pretty much the same thing but with a little hat to keep the bottle down. Thread the rubber band through the top ring. Make a face against the jig saw. The models isn't symmetrical and the face was the easiest way to fix it.

Support me on Patreon

This thing is delivered with the outstanding help from my patrons. To help me deliver quality printable terrain models, please pledge $1 or more: