Zoom Phone Tripod (Improved)

This updated version of my Zoom Phone Tripod tilts to any angle, including tilting forward for those awkward zoom yoga classes. Collapses nicely for storage. This version fixes a few issues: the legs snap into place more firmly, the jaws grip more securely, and they also pull the phone in against the threaded stem to keep it from flexing.

Print one of each piece, except print two of the plain legs. The leg with the clip, and also the jaws, each have small built-in break-away supports that needs to be removed. Snap the legs into the sockets, screw the ring down over them, and then feed the stem up through the center, sliding the jaws over the stem, and then finally adding the knob. 

Tightening the knob both clamps the phone in place and provides friction for holding the tilt angle. Adjusting the lower threaded ring lets you adjust the angle of the legs. Moving the top knob all the way to the top lets you push the stem in and hook the little nub on the end onto the hooks on one leg for tidy storage.