Prusa i3 MK2/MK2S/MK3 Webcam (Fish Eye) support and Strain relief

I mixed together various 'things' I found on Thingiverse and created this universal support platform. Credits to the original designers!

This is a support platform to fix various 'things' to your X-motor and acts as strain relief for the X-motor cables as well. Since it is attached to your X-motor, it moves up and down with the Z-height. It is a universal platform meant to fix Webcam's but maybe you'll have another use. I have added two designs for Webcams:

• one for a Fisch Eye / Wide angle Raspberry Pi camera

• one for a Logitech E35 camera
  If you have another camera; you can easily design a fixture yourself, a plain support design is included as a starter.

  The platform can be screwed with a spare M3 bolt/screw directly onto the spare hole on the X motor. You will need two M3 6mm screws / bolts to screw the camera support to the platform. The cables coming from the X motor can be secured with a zip-tie to the strain relief.

  UPDATE 27-05-2018: added a version (V2) which moves the camera approx 30 mm away from the z-axis - to have a better overall view on the build plate

Print instructions

Category: 3D Printer Accessories Print Settings

Printer Brand: Prusa

Printer: i3 MK2S

Rafts: No

Supports: No

Resolution: 0.15

Infill: 20%