This is a base for the HydraPump Smart and the HydraPump Smart HO. The base of these two pumps is similar enough that this print will work for both models. I have tried it. Here are few good use cases for the base:
- Elevate the pump so that things like a pool cover are stopped from being sucked into the pump base which can significantly lower the pump performance.
- Provide flatter base for the pump to rest evenly. This is good to make sure the bottom sensors are relatively even and the pump doesn't fall over.
- Stop large bits of debris from being sucked into the pump.
The model will print fine without supports.
Tags
The author hasn't provided the model origin yet.