Bondtech BMG Prusa MK3S/MK2.5S v2 FDM printable + RHD ver.C fan Shroud

New version of Bondtech BMG Prusa Upgrade MK3S/MK2.5S with RHD ver.C fan shroud.
I modified the original version model to be easy printable with FDM printers.
The original source: https://github.com/BondtechAB/Bondtech_Prusa_i3/tree/master/CAD-Files
It includes also the RHD ver.C Fan shroud (better than original IMHO) link: https://www.thingiverse.com/thing:3249344

All credits to Bondtech AB

I suggest to buy only original parts from the Bondtech website: https://www.bondtech.se/en/

This is the BOM list for the internal part:

1x Prusa MK3 to MK3S upgrade https://shop.prusa3d.com/en/printer-upgrades/898-original-prusa-i3-mk3-to-mk3s-upgrade-kit.html
1x Shaft Assembly https://www.bondtech.se/en/product/shaft-assembly
2x Ball Bearing 5x8x2.5 https://www.bondtech.se/en/product/ballbearing-5x8x2-5/
1x Motor Gear https://www.bondtech.se/en/product/motor-gear/
1x 3X32 mm Shaft https://www.bondtech.se/en/product/shafts/
1x Thread insert https://www.bondtech.se/en/product/thread-inserts/
1x Thumbscrew Assembly https://www.bondtech.se/en/product-category/spare-parts/thumbscrew-assembly/
1x 1.75 / 5.0 Bontech Drivergear kit. (No need if you own a MK3)
1x pancake motor with at least 16N.cm 1.8° or 0.9°

It need some modification of the firmware, i used the community firmware with LA1.5 from Vertigo235: https://github.com/vertigo235/Prusa-Firmware/releases

For the X carriage i suggest to use this from Vekoj: https://www.thingiverse.com/thing:3748932

Step files and F3d files are included.

UPDATE 1 31 August 2019 I added a body version (front and rear) and the hinge with 2mm recession to avoid using the threaded insert. These 3 stl file are marked "WITHOUT". Keep in mind that you will loose 1mm of lenght of the screw for the heatbreak fan as shown in the last picture.

Print instructions

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: Yes

Resolution: 0.2

Infill: 30%

Filament: CF-PETG