Another industrial/steampunk inspired retro light
Shorter print / fewer parts
Check my other Industrial/steampunk inspired lamp @
https://www.printables.com/model/164129
Printing details
Nozzle .4
Resolution .2 (speed is fine)
Supports not required but suggest on the fittings for appearance (over hang of fittings only
Brims not required but you know your printer better (nipples only)
print these items
2 - ¾” tee’s
3 - ¾” 90’s
1 - ¾” 4 way cross
4 – ¾” close nipples
1 – ¾” plug
2 – ¾” - 3 .6” nipples
1 - ¾" coupling
I included a larger socket to ¾" adapter with 90 for people who can not get the other size socket
Parts to purchase
1 socket pigtail
1 – electrical cord with switch
1 – retro 40 watt Edison bulb (led)
Crimp and heat connectors
assemble unit as per picture
feed wire from back through pipe (fish line make it easier if you have issues)
make the connections and pull wire back in.
Update: I was wondering if weight will be an issue (too easily tipped) So I added a file which you can print and then glue in a M12 nut (so no changes in current printing) then screw into the bottom on the open end of the 90's and cross. It also doubles as a levelling mechanism if you have a issue with you surface!
Added larger 2"&3" nipples (instead of the close nipple for those that want a wider stance and offset
Added a end cap (where wire comes out if a desired look wanted. Note put electrical wire through hole you can put a knot inside or glue for the wire stop
The author marked this model as their own original creation.