Wowstick Frog Box

I hated the wowstick storage box so I tried to make mine as small as possible.

This is a remix of the Frog Box 2.0 https://www.thingiverse.com/thing:4094861, dude is a gem for making this F360 model available.

So the bit holders are made to be tight, unfortunately it is a little bit of a calibration feat as I modeled it and tested the clearances with my printer. So I'm attaching some test piece to help assist with scaling your model up or down. If the bits are really tight I have left the bottom of them with holes so your long screw driver bit (flat head) can push them out.

The left over space was donated to the parts bin which will neatly hold your charging USB or spare screws you have floating about.

Also note: I used PETG for the hinges.  There are alot of reports requiring scaling of these because they are too stiff.  That is exactly the case for PLA.  I found PETG offers a bit more flex.  scale them up 0.5mm or so in the length (long ways) direction and test.

Requires 8 M3x20 button or socket head screws for hinges

Update May 6th, 2021

Added shorter version (can no longer keep a bit in the tool)

Model will fit on 45 deg angle on Prusa Mini bed

Update Jan 2, 2021

Added a 64 bit model version

Update Jan 4th, 2021

Forgot to upload the test bit file

Print Settings

Printer Brand:

Prusa

Printer: 

MMU2s

Rafts:

No

Supports: 

Yes

Resolution:

0.20

Infill: 

25%

Filament: MG chemicals pla green

Category: Hobby