Faceted Vase

Ever since seeing the Twisted 6-sided Vase Basic by MaakMijnIdee I've been interested in learning how to model something similar in Fusion 360. I found this video: https://knowledge.autodesk.com/support/fusion-360/learn-explore/caas/screencast/Main/Details/92384ff8-c0ce-4619-a649-da8541baf16f.html

So while I modeled this from scratch I'm crediting it as an inspirational remix. It was actually more complicated than I expected and the process involved creating an extrusion in the form environment and then twisting it, but instead of using that as the final body creating a new 3 dimensional sketch and then including the key points from the initial body, then using 3D lines to create the facets. Finally using the patch environment to turn the sketch to a new solid body. The result is a solid body you print in vase mode.

Instead of my normal MakerGear M2 printer I'm playing around with my new Monoprice Delta Mini to print this model.

Print Settings

Printer:

MonoPrice Mini Delta

Rafts:

No

Supports:

No

Resolution:

0.25

Infill:

0%

Notes:

This should be printed in "vase mode" - I used 2 solid bottom layers, then 1 outline in a spiral path all the way up the sides and no top layers.