Bondtech Extruder Mount w/ BLTouch (OpenBuilds Plate

Mount for Openbuilds C-Beam gantry plate (http://openbuildspartstore.com/c-beam-gantry-plate/) to setup for 1 Bondtech BMG extruder.

All holes that are not recessed will accept an M4 screw used in a self tapping method.

The Recessed holes will allow an M5 (openbuils standard low profile) screw to pass through to the threaded holes on the C-Beam plate without sticking out.

BLTouch mount uses M3 screws directly into plastic.

Mounting is based on the aluminum bracket that bondtech sells.

The top plate is for mounting a cable chain and just clears the C-Beam when mounted by ~1mm.

Side holes are for mounting part cooler(s)

Uses fan mount from my Dual BMG head which can be found here. https://www.thingiverse.com/thing:2641895

Print Settings

Printer:

Self Built Cartesian Style

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

.4

Infill:

100% Recommended for stiffness