AR Wing 900 GPS Mount

Inspired by this https://www.thingiverse.com/thing:3017417. I wanted a mount that was able to mount not just a GPS and not rely on double sided tape.

This GPS mount/shelf is positioned 20mm back from the front edge of the motor hump and is 30mm long.

There are also 4 mounting holes that could be used to mount a head tracker or anything else! The spacing for these is 20.2mm and are sized to take a M2 screw.

Print Settings

Printer:

P3 Steel

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

20-30%

Filament:

any