Wallmount for tubing (brewtools / gardena)

This is a wallmount made for holding brewtools and gardena tubing.

The top five slots holds Brewtools 16x25mm silicone tubing:
The bottom three slots holds normal gardena tubing with 16.5-17mm OD

Screws to the wall with two 4x20mm pan head screws.

Since this mount is made to be flexible i do not recommend printing this mount in PLA.

ASA, ABS or PETG is a better suited plastic for the application (i used ASA).

I recommend printing the holder on its side. To make it as sturdy as possible i used 25% infill and 4 perimeters. Prints without supports.

If you don't have a printer yourself and live in Norway, you can buy one from my website http://lysberg3d.no