Frame for Kamvas 16 tablet for desk monitor arm with VESA mount

I had a spare desk monitor arm, and I needed a stand for my tablet. Sadly, it doesn't have a VESA mount, so I made a simple and sturdy frame for it myself. I printed it in PETG with support enabled. It took about 200g of filament.

Final assembly requires at least four M5 bolts with hex heads and nuts to fasten. Though I used eight of those just in case. Since the holes are a bit tight, it's a good idea to heat up bolts (be aware to not burn yourself!). I also put a bit of foam on the bottom frame loops, so the tablet wouldn't slide.