Revopoint POP protective carrying case

News : I've been asked to make an evolution of it, a case to stay on while scanning, you can find it on Cults3D : https://cults3d.com/en/3d-model/gadget/protective-scanning-case-for-the-revopoint-pop-3d-scanner-nebulus

Protective carrying case for the Revopoint POP 3D Scanner

• A small edge at the bottom prevents the screen from touching the plastic and thus avoid scratches
• A notch on both sides to ease the removal, with the bottom notch being bigger for those who don't want to remove the small tripod
• A small clip that helps prevent the case from slipping off, the use of it might be limited, though, it depends on how it prints on your printer

If you like it, if it fits, if it's useful to you, in short if you are happy with it, you may (though please don't feel obliged to at all) make a symbolic donation

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

No

Resolution:

150 to 300

Infill:

15-20

Filament: Prusament PLA Any

Notes:

Printing draft (0.3) with my Prusa_MK3 worked fine (1h39 printing time) , but 0.2 or 0.15 for a better finishing is even better (up to 4h30)